DFM Series Guide Rod Aluminium Air Cylinder Tubes
Setšoantšo sa DFM Series
NO | d | d1-2 | A | B | C | D | E |
1 | φ12 | φ11.5 | 60 | 41 | 28 | 10 | - |
2 | φ16 | φ13 | 67 | 46 | 32 | 8.1 | - |
3 | φ20 | φ15.5 | 83 | 58 | 36 | 10 | - |
4 | φ25 | φ17.5 | 95 | 68 | 44 | 10 | - |
5 | φ32 | φ20 | 110 | 78 | 49 | 10 | - |
6 | φ40 | φ22.5 | 120 | 88 | 54 | 13.5 | - |
7 | φ50 | φ27.5 | 148 | 110 | 64 | 16 | 40.5 |
8 | φ63 | φ27.5 | 162 | 125 | 78 | 13.5 | 42 |
Boitsebiso ba Aluminium Alloy Profile Aluminium pneumatic cylinder tube: aluminium motsoako 6063 T5
Bolelele ba rona bo tloaelehileng ke 2000mm, haeba ho hlokahala bolelele bo bong, ka kopo re tsebise ka bolokolohi.
Anodized holim'a: Inner tube-15±5μm Outer tube-10±5μm
Litumellano tsa ho rala FESTO, SMC, Airtac, Chelic joalo-joalo.
Litumellano tsa maemo a ISO 6430 ISO6431 VDMA 24562 ISO15552 joalo-joalo.
E sebelisoa bakeng sa cylinder e tloaelehileng, compact cylinder, mini cylinder, Dual Rod cylinder, Slide cylinder, Slide Table cylinder, Gripper joalo-joalo Hape bakeng sa li-cylinders tse khethehileng.
Sebopeho sa Lik'hemik'hale:
Sebopeho sa Lik'hemik'hale | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Tlhaloso:
Matla a Tsietsi (N/mm2) | Matla a ho Kotuloa (N/mm2) | Ductility (%) | Bothata ba Sefahleho | Ho Nepaha ha Diameter ka Hare | Bokhopo ba ka Hare | Ho otloloha | Bothata ba Botenya |
Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Ho mamella Tube ea Aluminium Alloy:
TUMELO EA ALUMINIUM ALOY TUBE | ||||||
Bore Size | MAHLOMOLA | |||||
mm | H9(mm) | H10(mm) | H11(mm) | |||
16 | 0.043 | 0.07 | 0.11 | |||
20 | 0.052 | 0.084 | 0.13 | |||
25 | 0.052 | 0.084 | 0.13 | |||
32 | 0.062 | 0.1 | 0.16 | |||
40 | 0.062 | 0.1 | 0.16 | |||
50 | 0.062 | 0.1 | 0.16 | |||
63 | 0.074 | 0.12 | 0.19 | |||
70 | 0.074 | 0.12 | 0.19 | |||
80 | 0.074 | 0.12 | 0.19 | |||
100 | 0.087 | 0.14 | 0.22 | |||
125 | 0.1 | 0.16 | 0.25 | |||
160 | 0.1 | 0.16 | 0.25 | |||
200 | 0.115 | 0.185 | 0.29 | |||
250 | 0.115 | 0.185 | 0.29 | |||
320 | 0.14 | 0.23 | 0.36 |
LBH:
Q1: Mohlala oa DFM ke eng? A: ☆ Ke maemo a FESTO.Boholo ba bore bo tloha ho Dia12mm ho isa Dia100mm.
Tlhaloso:☆ Khanna le ho tataisa yuniti ntlong e le 'ngoe
☆ Ho hanyetsa ho phahameng ho li-torque le matla a lateral
☆ Tataiso ea ho tsamaisa bolo e hlakileng kapa e potolohang hape
☆ Mefuta e fapaneng ea likhetho tsa ho hola le ho hokela
☆ Mefuta e fapaneng e fapaneng bakeng sa lits'ebetso tse ikhethileng
Q2: Haeba re reka DFM, na hoa khoneha ka anodizing bakeng sa Aluminium 6063 T5 Cylinder Tube?
A: Pneumatic Cylinder ena ha e khothalletsoe hore e be oxidized, hobane moreki o hloka ho e khaola ka boeena ebe o e sebetsa ebe o etsa phekolo ea oksijene ka mor'a ho e reka.
Q3: Ke bolelele bofe haeba re laelaAluminium Extrusion Bakeng sa Pneumatic Cylinders?
A: Bolelele ke 2 metres.
Q4: Sebopeho sa DFM ea mohlala
A: ☆ Ka drive e tataisitsoeng ea DFM, u ka itšetleha ka tataiso e nepahetseng le ho monya ho hoholo ha litorque le matla a ka morao, hammoho le moralo o tiileng, o kopaneng.E loketse ho clamping, ho phahamisa le ho emisa lits'ebetso.
Q5: Wkatibake nako ea ho pepaka Aluminium Profile bakeng sa Air Cylinder?
A: ☆ Haeba li-tubes tse hlophisitsoeng, nako e hloka matsatsi a 50-60 a ho sebetsa, empa haeba bakeng sa li-tubes tse tloaelehileng, nako ea rona ea ho fana ke matsatsi a 15-20 a sebetsang.